It’s a good idea to check all around and clean the seal regularly anyway, because as well as a potential place for small items to get trapped, this is where mould and bacteria can fester.
A regular scrub can help prevent build-up. If left too long, mould sinks into the porous rubber seal and is impossible to remove, meaning you may need to replace it.
5. Clean out the filter on the front
Some items loose in the machine can work their way down to the filter. You’ll usually find the filter at the front of the machine, on the right and close to the floor.
On some models, the filter will be on the side. Follow the instructions in your instruction manual to check and clean the filter.
Make sure you put down an oven tray or dish to capture water, as when you remove the cap on the hose, any water trapped in the machine will otherwise spill onto the floor.
6. Find out if items are stuck in the outer drum
continued on next page
